|
ARMATURE SHAFT ASSEMBLY MACHINE
ACAM-8000
The Globe ACAM-8000 armature shaft assembly machine automatically inserts armature shafts into the preselected armature stacks of interlocked (dimpled) laminations for sub-fractional and fractional horsepower electric motors. As with all Globe “Series 8000” machines, the ACAM-8000 can be used as a stand-alone machine, in a work-cell or easily moved up to any style material handling system for use in a fully automated armature production line.
STANDARD FEATURES
IC-2000 Industrial Computer open architecture control system incorporating ‘off-the-shelf’ scaleable hardware including:
Pentium micro processor.
ISA industrial grade Bus.
Flash Drive for program storage (non-rotating.
3.5, 144 Mbyte floppy disk drive for part parameter and production data backup.
Ethernet 10-based-2 coaxial networking.
Centronics printer port.
QNX real-time operating system providing a windowing environment, displaying and including: parameter storage for up to 1000 part configurations, operator selectable and graphically displayed production data, extended diagnostics through complete I/O status examination and fault prompting, setup utilities viewing and single keying of multiple languages.
Four (4) station turret.
Metric construction.
ISO valves and cylinders where possible.
12 mm plug-in proximity switches.
Modular guard with electric interlocks and extruded aluminum frame with polycarbonate inserts.
Designed to accommodate a lamination stack height range of 13 to 64 mm (0.5 to 2.5 in.).
Manual load of interlocked lamination stack.
Manually adjustable shaft hopper for various shaft lengths.
Manual load of shafts into shaft hopper (holds approximately 400 with an 8mm (0.3 in.) shaft diameter.
Automatic placement of shaft into the lamination stack.
Servo drive ball screw shaft press.
Force press monitor utilizing an inline load cell providing a force and linear position generated signature curve with high and low limit settings via interactive touch screen.
Calibration fixture for force press monitoring above.
CONTROLS
A conveniently located operator interactive 265mm (10.4 in.) VGA color touch screen operator providing a graphical user interface, displayed in a windows environment.
armature Capacities
Description
Minimum
Maximum
Shaft Length
76.0 mm (3.000 inches)
254.0 mm (10.000 inches)
Shaft Diameter
3.2 mm (0.125 inch)
15.9 mm ( .625 inch)
Stack Diameter
25.4 mm (1.000 inch)
76.0 mm ( 3.000 inches)
Stack Length
12.7 mm (0.500 inch)
76.0 mm ( 3.000 inches)
Machine Specifications
Electrical Requirements
Standard electrical requirements are:
208/240/380/415/480/575 volts, 3 phase, 50/60 HERTZ
Pneumatic Requirements
A one-half inch, 100 PSI (6.8 atm) capacity air line should supply the machine. A pressure regulator will reduce the pressure to 80 PSI (5.4 atm) for machine operation.
Machine Dimensions (approximate)
WIDTH: 1549 mm ( 61 inches)
HEIGHT: 2540 mm (100 inches)
LENGTH: 1981 mm ( 78 inches)
Weight (approximate)
1134 kilograms (2500 pounds)
