|
ARMATURE CORE ASSEMBLY MACHINE
ASLR-8600
The Globe ASLR-8600 armature core assembly machine automatically inserts armature shafts into the preselected armature stacks of interlocked (dimpled) laminations for sub-fractional and fractional horsepower electric motors. As with all Globe “Series 8000” machines, the ASLR-8600 can be used as a stand-alone machine, in a work-cell or easily moved up to any style material handling system for use in a fully automated armature production line.
STANDARD FEATURES
Manual load with automatic core unload.
Automatic shaft load.
Shaft press using ball screw with electric servomotor drive for higher efficiency, less maintenance and clean operating area.
No hydraulics required.
Controllable shaft press pressure range up to 24,000 lbs. (10,886 kg).
No tooling changes are required for changes in stack height.
Globe’s exclusive IC-2000 TM Intelligent Control System.
Six (6) Station turret for lamination stack loading, shaft loading, shaft press and unloading.
Metric construction.
ISO valves and cylinders where possible.
12 mm plug-in proximity switches for ease of maintenance.
Modular guard with electric interlocks and extruded aluminum frame with polycarbonate inserts.
OPTIONS
Automatic load of stacks from conveyor or pallet.
PRODUCTIVITY
Cycle time will depend on the armature configuration. Typically, however, with quality parts the ASLR-8600 produces 600 parts per hour.
CONTROLS
A conveniently located interactive touch screen operator control panel provides machine diagnostics, 99 part parameter storage and a printer port to print parameters and last eight hours of production data for five functions.
armature Capacities
Description
Minimum
Maximum
Shaft Length
76.0 mm (3.000 inches)
254.0 mm (10.000 inches)
Shaft Diameter
3.2 mm (0.125 inch)
15.9 mm ( .625 inch)
Stack Diameter
25.4 mm (1.000 inch)
76.0 mm ( 3.000 inches)
Stack Length
12.7 mm (0.500 inch)
76.0 mm ( 3.000 inches)
Machine Specifications
Electrical Requirements
Standard electrical requirements are:
208/240/380/415/480/575 volts, 3 phase, 50/60 HERTZ
Pneumatic Requirements
A one-half inch, 100 PSI (6.8 atm) capacity air line should supply the machine. A pressure regulator will reduce the pressure to 80 PSI (5.4 atm) for machine operation.
Machine Dimensions (approximate)
WIDTH: 1549 mm ( 61 inches)
HEIGHT: 2540 mm (100 inches)
LENGTH: 1981 mm ( 78 inches)
Weight (approximate)
1134 kilograms (2500 pounds)
