|
STATOR TERMINAL INSERTING MACHINE – AFTER WINDING
TIMA-8000AWV/p
SPECIFIC FEATURES
Automatic load/unload stator bore vertical from pallet.
Machine radially locates the stator and lifts the stator out of the pallet, inserts two (2) or more terminals, lowers the stator, rotates to radial position, lifts stator, inserts two (2) or more terminals, and lowers stator back to the pallet.
STANDARD FEATURES
Centralized push button operator control panel.
Allen-Bradley Data Table Access Module for machine parameter data entry with two (2) line, 16 character display including fault coded diagnostics and parts counter.
Allen-Bradley SLC-500 Programmable Controller.
Metric construction.
12mm plug-in proximity switches.
Modular guarding with all electrical interlocks and extruded aluminum frame with polycarbonate inserts.
Capable of a six (6) second cycle time to insert four (4) terminals.
Manual adjustment for different radial positions to provide fast changeover.
Terminal presence confirmation and reject output signal.
Low material, malfunction and cycle interrupt lights.
No change over for different stack heights.
TERMINAL PLACING HEADS
Terminal placing heads for displacement style terminals supplied by customer or as an option by Globe.
TOOLING FOR EACH STATOR DESIGN
Tooling for lifting the stator from the walking beam or pallet.
Tooling plate to guide the stator during terminal placement.
Machine Specifications
Electrical Requirements
220/380/440/460/480 Volts, 3-phase, 50/60 Hz, 5 KVA.
Pneumatic Requirements
A 0.5 in. (13 mm), 100 psi (6.8 atm) capacity air line should supply the machine. A supplied pressure regulator will reduce pressure to 80 psi (5.4 atm) for machine operation.
Machine Dimensions (approximate)
WIDTH: 1.5 M (59 inches)
LENGTH: 1.5 M (59 inches)
HEIGHT: 2.3 M (91 inches)
Operating Environment
40 degrees Fahrenheit (4 degrees Centigrade) to 104 degrees Fahrenheit (40 degrees).
Machine Weight (approximate)
1,000 kilograms (2,200 pounds)
stator Capacities
Description
Minimum
Maximum
Outside Dimension
38.00 mm ( 1.50 inches) square
120.00 mm ( 4.70 inches) square
Bore Diameter
35.00 mm ( 1.38 inches)
76.00 mm ( 3.00 inches)
Stack Height
17.00 mm ( 0.57 inch)
65.00 mm ( 2.56 inches)
Wire Size Range
0.15 mm (34AWG)
1.02 mm (18AWG)
Back to Stator Terminal Inserters
