BPMA-8000 Stator Board Placing Machine

STANDARD FEATURES

  • Automatic load/unload.
  • Centralized push button operator control panel.
  • Allen-Bradley Data Table Access Module for machine parameter data entry with two (2) line, 16 character display including fault coded diagnostics and parts counter.
  • Allen-Bradley SLC-500 Programmable Controller.
  • Metric construction.
  • 12mm plug-in proximity switches.
  • Modular guarding with all electrical interlocks and extruded aluminum frame with polycarbonate inserts.
  • Low material, malfunction, and cycle interrupt lights.
  • Terminal board presence check and reject output signal.
  • No stack height change required.

MODELS

  • BPMA-8000.  Machine with one placing station to place one plastic end board on the stator.
  • BPMA-8200.  Machine with two placing stations to place two plastic end boards on the stator.

TOOLING

  • Vibratory bowl or bowls to accommodate each plastic end board.
    • Orientation and placing tooling for each placing station. Lift tooling for each stator lamination configuration.

OPTIONS

Rotating mechanism for placing the bottom board in station number 1 in order to achieve a cycle time of less than 6 seconds.

MACHINE SPECIFICATIONS

Electrical Requirements
Standard: 208/240/380/415/480/575 Volts; 3-phase; 50/60 Hertz; 3 to 5 KVA depending on size of plastic board and model of machine.

Pneumatic Requirements
A 0.5 inch (13 mm), 100 psi (6.8 atm) capacity air line should supply the machine. A supplied pressure regulator will reduce pressure to 80 psi (5.4 atm) for machine operation.

Machine Dimensions (approximate for BPMA-8200)

  • WIDTH: 2160 mm (85 inches)
  • HEIGHT: 2210 mm (87 inches)
  • LENGTH: 2795 mm (110 inches)

Machine Weight (approximate for BPMA-8200)
1,365 kilograms (3000 pounds)

Operating Environment
40º Fahrenheit (4º Centigrade) to 104 º Fahrenheit (40º Centigrade).

STATOR CAPACITIES

Outside Dimension

Min 38 mm (1.50 inches) square

Max 120 mm (4.7 inches) square

Bore Diameter

Min 35 mm (1.38 inches)

Max 76 mm (3.0 inches)

Stack Height

Min 17 mm (0.57 inch)

Max 76 mm (3.0 inches)