|
|
ARMATURE LAMINATION & SHAFT ASSEMBLY MACHINE
MSLA/XL-90
DESCRIPTION
The Model MSLA/XL-90 is an inline, fully automatic machine. It is designed to select a preset stack length of armature laminations from a main supply magazine or in the case of interlocked lamination, to accept the prestacked core then check this stack to determine proper length tolerance. If correct, the Model MSLA/XL-90 will select it (from a main supply hopper) and place a shaft to the correct position in the selected core. Finished assemblies are automatically unloaded to an outgoing transfer system.
Where double insulated tubes are required, another station can be added, which selects and places the tube in the same manner prior to the shaft select and place station.
Skewing of loose lamination stacks is accomplished using an adjustable angle alignment key in the lamination transfer nest that is set to the correct angular position prior to shaft or tube insertion.
SEQUENCE OF OPERATION
Select stack from main supply and deposit into transfer car nest.
Measure stack. If out of tolerance, reject to reject supply chute.
Tighten lamination slot alignment key (skew if required). Select/place shaft into preselected stack and unload finished assembly.
NOTE: If a double insulation tube is required, this is handled at Station #3 and the aforementioned Station #3 operations are moved to Station #4.
FEATURES
Heavy duty construction.
Fully automatic.
Hydraulic shaft press system (5000 lb – 22,246N).
Measure and reject station.
Lamination supply depletion detection.
Shaft supply depletion detection.
Solid state programmable control.
Multi-station lamination supply.
Automatic load/unload.
Electroluminescent touch screen operator interface.
Smart valves with noise immune serial communications to machine control eliminate bulky wire bundles and junction boxes.
Readily available (off-the-shelf) control components.
Stand alone or machine mounted control enclosure.
OPTIONS
One-half stack rotation.
Add a lamination station.
Stack to stack perpendicularity check (Go/No/Go).
Shaft press load cell check with digital read out.
Digital read out on stack height measure system.
Machine diagnostics.
Quick change tooling.
TECHNICAL SPECIFICATIONS
Capacity*
Stack Diameter:
1” to 2.5”
25.4 to 64.0 mm
Stack Height:
0.75” to 2.5”
19.1 to 64.0 mm
Production
Shaft Length:
4.5” to 8.0”
114.0 to 203.0 mm
500 pph @ 100% efficiency
Shaft Diameter:
0.1875” to 0.625”
4.7 to 15.9 mm
Power Requirements:
1.6 kW
230/46V 3 phase 60 Hz
Shipping Weight:
4000 lbs
1814 kg
Shipping Dimensions: (approximate)
6’ x 6’ x 7’
1.6 x 1.6 x 1.8 m
* Alteration rights reserved.
+ For other sized contact Micafil
